Tweet

Mods



Safety Warnings

  • Do not use Ni200 and Ti coils with non-temperature control devices/mods. This is a risk of battery explosion! Please make sure that the devices/mods that you are using is capable of controlling coil temperature
  • You must be sure that your mod AND batteries can handle SUB OHM coils. If you're using a regulated mod, make sure it can handle the amps. For mechanical mod users, please use 30 Amp batteries or higher.
  • CHECK YOUR AMPS here, OHMS LAW CALCULATOR and be safe! 
  • Never use a tank/rda with a floating pin on a Hybrid device: This is a risk of battery explosion!

 Important Note: There is always an inherent risk when using any rechargeable batteries at anytime and under any circumstances.
When working with Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells, please be cautious and carefully use as they are very sensitive to charging characteristics and may explode or burn if mishandled. Please make sure that you have great knowledge on all rechargeable batteries before you use them. Always charge batteries on a clean and fire-proof surface. Never leave charging batteries unattended. If you see that there are visible damages on the batteries, please do not use. We will not be held responsible for damage if there is any modification of the batteries/chargers in any form. We are not responsible for any damage caused by misuse or mishandling of Li-Ion batteries and chargers.