The iJoy Shogun Box Mod is powered by the UNIV chip, which provides variable wattage mode, pod mode, and temperature control mode. Variable wattage output mode has a range of 1 to 180W, atomizer resistance range of 0.05 to 3.0 ohm, 0 to 7.5V output range, and a 45A max current output. Temperature control is compatible with nickel, titanium, stainless steel, and has a range of 300 to 600 degrees Fahrenheit. The Shogun accommodates two 18650 batteries secured by a magnetic battery access door. Three buttons consisting of an over-sized firing button and two adjustment buttons. This device's 0.96 inch screen displays wattage output, temperature output, voltage output, power mode, atomizer resistance, puff counter and dual battery life indicator. The Shogun's sleek, curved body consists of a zinc alloy frame and a resin panel on both sides. This box mod has a spring loaded gold plated 510 connection and has several protection features such as short circuit protection, low power alert, and more.

This starter kit is paired with the Katana Sub-Ohm Tank, a 28mm atomizer that's 57.7mm tall. Standard glass e-liquid capacity is 4ml and is increased to 5.5ml with the bubble glass. The reservoir can be refilled using the slide to fill top cap. Versatility is built into the Katana's design, as it allows the use of all iJoy X3, DM, and KM coils. This vape tank comes with a KM1 single mesh replacement coil and the DM-M2 replacement coil. Both of these coils have an atomizer resistance 0.15 ohm and has a wattage output range of 40 to 80W. Airflow is adjusted with a bottom airflow ring that has two triangular air slots that are 7mm wide and 4mm tall. The Katana has a gold plated contact and a 14mm wide 810 bore drip tip.

  • UNIV Chip
    • 1 to 180W Output
    • 0.05 to 3.0 ohm Atomizer Resistance Range
    • 0 to 7.5V Voltage Range
    • 45A Max Current Output
    • Firmware Upgradeable
  • Temperature Control Suite
    • Ni200 Nickel Support
    • Titanium Support
    • SS316 Support
    • TCR Mode
    • 0.05 to 3.0 ohm Atomizer Resistance Range
    • 300 to 600 Degrees Fahrenheit
    • Atomizer Lock
  • Magnetic Battery Access Door
    • Dual 18650 Battery Powered (sold separately)
  • Three Button Control
    • Enlarged Firing Button
    • Adjustment Buttons
  • Two Line 0.96 OLED Display
    • Temperature Mode and Output
    • Output Power
    • Atomizer Resistance
    • Battery Life Indicator
    • Neatly Displayed
  • Curved Metal Chassis Design
    • Zinc Alloy Frame
    • Resin Panel
  • Spring Loaded Gold Plated 510 Connection
    • Stainless Steel Thread Point
  • Short Circuit Protection/Low Power Alert/Battery Reverse Protection/PCB Temperature Overheat Protection/High and Low Resistance Protection/10 Second Switch Timeout Protection
  • 28mm Diameter Base
    • 28mm Widest Diameter
    • 57.7mm Tall
  • 4.0ml Standard Glass Capacity
  • 5.5ml Max Capacity
    • Slide to Fill
    • Pre-Installed
  • Compatible with X3, DM, and and KM Coils
    • KM1 Replacement Coil
      • 0.15 ohm
      • 40 to 80W
      • Single Mesh Coil
      • Pre-Installed
    • DM-M2 Replacement Coil
      • 0.15 ohm
      • 40 to 80W
      • Dual Mesh Coil
  • Dual Triangular Bottom Airflow
    • 7mm by 4mm Each
  • Stainless Steel Construction